ATF 41F

ATF 41F The last couple of years with the fight against ATF 41P. The rule was finalized and published in the Federal Register on the morning of (1/15/2016). The new ATF 41F brings many new changes to how this industry works, but here are the main things to keep in mind: Here is the full Ruling [...]

By |2016-06-01T15:05:44+00:00June 1st, 2016|News|Comments Off on ATF 41F

Rossi .44 Lifter Arm Issue

Rossi .44 Mag Lifter Arm Issue We had a new Rossi .44 Mag come in; however, the charging lever wouldn't work. The cartridge would not load into the battery. We had to polish the lifter arm because it was rubbing onto the receiver. This means that the changing lever wouldn't lift. We started with a [...]

By |2016-03-10T21:35:09+00:00March 10th, 2016|Gunsmithing|Comments Off on Rossi .44 Lifter Arm Issue

Iver Johnson Top Break is Broken and Can’t be Fixed

Iver Johnson Top Break is Broken and Can't be Fixed Unfortunately, the lifter arm is broken on this Iver Johnson Top Breaker. With a lifter arm being broken, this won't allow the cylinder to rotate. We are not able to order a part for this specific gun at this time. Check us out, daily! We [...]

By |2016-03-10T21:32:59+00:00March 10th, 2016|Gunsmithing|Comments Off on Iver Johnson Top Break is Broken and Can’t be Fixed

Remington Model 11 Firing Pin Fix

Remington Model 11 Firing Pin Fix Our gunsmith had a new mission to undertake, today. The firing pin on a Remington Model 11 decided to break. Our gunsmith took on the mission with ease, knowing how to solve the issue. The gunsmith needed to re-weld the pin, first. This would ensure that the pin would [...]

By |2016-03-10T21:29:57+00:00March 10th, 2016|Gunsmithing|Comments Off on Remington Model 11 Firing Pin Fix

Over Under Shotgun Porting

Over Under Shotgun Porting Our gunsmith decided to work on the barrels of the shotgun as a challenge, today. In order to work on the barrels of the shotgun, our gunsmith had to rotate them--along with the milling machine as well. The milling machine needed to be rotated at 30 degrees; whereas, the barrels needed [...]

By |2016-03-10T21:25:00+00:00March 10th, 2016|Gunsmithing|Comments Off on Over Under Shotgun Porting

Fixed Barrel Lug

Fixed Barrel Lug We had barrel from a Star firearm with a broken lug. Our gunsmith re-welded and pinned the lug back on. Re-welding and pinning the lug back onto the barrel would ensure that the lug wouldn't break again. Below, are some images to show the broken lug on the barrel: Check us out, [...]

By |2016-03-10T21:19:23+00:00March 10th, 2016|Gunsmithing|Comments Off on Fixed Barrel Lug

Manufacturer Malfunction With Scope Mount on Howa .22 LR

Manufacturer Malfunction With Scope Mount on Howa .22 LR It doesn't happen all the time; however, it does happen. We had a Howa .22 LR with an offset scope mount. Thankfully, our gunsmith was able to reset without a problem. Our gunsmith needed to use the centering tool on the milling machine. This would let [...]

By |2016-03-10T21:16:58+00:00March 10th, 2016|Gunsmithing|Comments Off on Manufacturer Malfunction With Scope Mount on Howa .22 LR

Crackshot Lever Action Fix

Crackshot Lever Action Fix This Crackshot .22 LR had a loose lever. Unfortunately, this a significant problem if the gun cannot fire. Our gunsmith decided to take on the challenge, today. The first thing that was necessary to do was replace the piece that enabled the lever to remain steady. The gun was then tested [...]

By |2016-03-10T21:00:23+00:00March 10th, 2016|Gunsmithing|Comments Off on Crackshot Lever Action Fix