ATF 41F

ATF 41F The last couple of years with the fight against ATF 41P. The rule was finalized and published in the Federal Register on the morning of (1/15/2016). The new ATF 41F brings many new changes to how this industry works, but here are the main things to keep in mind: Here is the full Ruling [...]

By |2016-06-01T15:05:44+00:00June 1st, 2016|News|Comments Off on ATF 41F

Over Under Shotgun Porting

Over Under Shotgun Porting Our gunsmith decided to work on the barrels of the shotgun as a challenge, today. In order to work on the barrels of the shotgun, our gunsmith had to rotate them--along with the milling machine as well. The milling machine needed to be rotated at 30 degrees; whereas, the barrels needed [...]

By |2016-03-10T21:25:00+00:00March 10th, 2016|Gunsmithing|Comments Off on Over Under Shotgun Porting

Manufacturer Malfunction With Scope Mount on Howa .22 LR

Manufacturer Malfunction With Scope Mount on Howa .22 LR It doesn't happen all the time; however, it does happen. We had a Howa .22 LR with an offset scope mount. Thankfully, our gunsmith was able to reset without a problem. Our gunsmith needed to use the centering tool on the milling machine. This would let [...]

By |2016-03-10T21:16:58+00:00March 10th, 2016|Gunsmithing|Comments Off on Manufacturer Malfunction With Scope Mount on Howa .22 LR

AK Flash Hider Original

AK Flash Hider Original With our gunsmith service, we decided to try something new. We took an AK Flash Hider and decided to add two parts. It was something our skilled gunsmith whom wanted to try out a new project with this gun. Our gunsmith took an AK Flash Hider without any threading--or a detente [...]

By |2016-03-10T20:54:23+00:00March 10th, 2016|Gunsmithing|Comments Off on AK Flash Hider Original

New England 20ga Scope Mount

New England 20ga Scope Mount Today, our gunsmith's goal was to install a picatinny rail onto the shotgun. This process would enable a customer to place a scope on their gun. Our gunsmith had to line up the scope mount with the milling machine in order to begin the installation: This is how the finished [...]

By |2016-03-10T20:48:40+00:00March 10th, 2016|Gunsmithing|Comments Off on New England 20ga Scope Mount

Real Gun Bluing Knowledge

Real Gun Bluing Knowledge Bluing is most commonly used by gun manufacturers, gunsmiths and gun owners to improve the cosmetic appearance of, and provide a measure of corrosion resistance to, their firearms. Bluing also helps to maintain the metal finish by resisting tangential scratching, and also helps to reduce glare to the eyes of the [...]

By |2015-05-18T00:56:59+00:00May 18th, 2015|Gunsmithing|Comments Off on Real Gun Bluing Knowledge