Rossi .44 Lifter Arm Issue

Rossi .44 Mag Lifter Arm Issue We had a new Rossi .44 Mag come in; however, the charging lever wouldn't work. The cartridge would not load into the battery. We had to polish the lifter arm because it was rubbing onto the receiver. This means that the changing lever wouldn't lift. We started with a [...]

By |2016-03-10T21:35:09+00:00March 10th, 2016|Gunsmithing|Comments Off on Rossi .44 Lifter Arm Issue

Remington Model 11 Firing Pin Fix

Remington Model 11 Firing Pin Fix Our gunsmith had a new mission to undertake, today. The firing pin on a Remington Model 11 decided to break. Our gunsmith took on the mission with ease, knowing how to solve the issue. The gunsmith needed to re-weld the pin, first. This would ensure that the pin would [...]

By |2016-03-10T21:29:57+00:00March 10th, 2016|Gunsmithing|Comments Off on Remington Model 11 Firing Pin Fix

Crackshot Lever Action Fix

Crackshot Lever Action Fix This Crackshot .22 LR had a loose lever. Unfortunately, this a significant problem if the gun cannot fire. Our gunsmith decided to take on the challenge, today. The first thing that was necessary to do was replace the piece that enabled the lever to remain steady. The gun was then tested [...]

By |2016-03-10T21:00:23+00:00March 10th, 2016|Gunsmithing|Comments Off on Crackshot Lever Action Fix

Jammed Gas Block Piston AR Rifle

Jammed Gas Block Piston AR Rifle Our Gunsmith received a new challenge, today. We had a jammed gas block on a Piston AR and somehow our talented gunsmith has successfully fixed the issue. AR Piston AR Rifle's typically begin to get residue after a lot of usage. This will eventually cause the rifle to then [...]

By |2016-03-10T20:51:25+00:00March 10th, 2016|Gunsmithing|Comments Off on Jammed Gas Block Piston AR Rifle

Rossi .44 Mag Lifter Arm Issue

Rossi .44 Mag Lifter Arm Issue We had a new Rossi .44 Mag come in; however, the charging lever wouldn't work. The cartridge would not load into the battery. We had to polish the lifter arm because it was rubbing onto the receiver. This means that the changing lever wouldn't lift. We started with a [...]

By |2016-03-10T18:16:52+00:00March 10th, 2016|Gunsmithing|Comments Off on Rossi .44 Mag Lifter Arm Issue