ATF 41F

ATF 41F The last couple of years with the fight against ATF 41P. The rule was finalized and published in the Federal Register on the morning of (1/15/2016). The new ATF 41F brings many new changes to how this industry works, but here are the main things to keep in mind: Here is the full Ruling [...]

By |2016-06-01T15:05:44+00:00June 1st, 2016|News|Comments Off on ATF 41F

Rossi .44 Lifter Arm Issue

Rossi .44 Mag Lifter Arm Issue We had a new Rossi .44 Mag come in; however, the charging lever wouldn't work. The cartridge would not load into the battery. We had to polish the lifter arm because it was rubbing onto the receiver. This means that the changing lever wouldn't lift. We started with a [...]

By |2016-03-10T21:35:09+00:00March 10th, 2016|Gunsmithing|Comments Off on Rossi .44 Lifter Arm Issue

Colt Barrel Replacement

Colt Barrel Replacement Today, our gunsmith was given an interesting task. A customer had a Colt .45 gun with some major damage done on the barrel. This was because the customer had taken a grinder to the barrel; it eventually scrapped the entire part. Our gunsmith had no choice but to give the Colt .45 [...]

By |2016-03-10T20:58:01+00:00March 10th, 2016|Gunsmithing|Comments Off on Colt Barrel Replacement

Jammed Gas Block Piston AR Rifle

Jammed Gas Block Piston AR Rifle Our Gunsmith received a new challenge, today. We had a jammed gas block on a Piston AR and somehow our talented gunsmith has successfully fixed the issue. AR Piston AR Rifle's typically begin to get residue after a lot of usage. This will eventually cause the rifle to then [...]

By |2016-03-10T20:51:25+00:00March 10th, 2016|Gunsmithing|Comments Off on Jammed Gas Block Piston AR Rifle

Rossi .44 Mag Lifter Arm Issue

Rossi .44 Mag Lifter Arm Issue We had a new Rossi .44 Mag come in; however, the charging lever wouldn't work. The cartridge would not load into the battery. We had to polish the lifter arm because it was rubbing onto the receiver. This means that the changing lever wouldn't lift. We started with a [...]

By |2016-03-10T18:16:52+00:00March 10th, 2016|Gunsmithing|Comments Off on Rossi .44 Mag Lifter Arm Issue

Real Gun Bluing Knowledge

Real Gun Bluing Knowledge Bluing is most commonly used by gun manufacturers, gunsmiths and gun owners to improve the cosmetic appearance of, and provide a measure of corrosion resistance to, their firearms. Bluing also helps to maintain the metal finish by resisting tangential scratching, and also helps to reduce glare to the eyes of the [...]

By |2015-05-18T00:56:59+00:00May 18th, 2015|Gunsmithing|Comments Off on Real Gun Bluing Knowledge